My Toyota Sienna Dashboard layout

Toyota Sienna Dashboard Instrument Panel, Warning Lights






Toyota Sienna DashBoard overview

1.} Toyota Sienna Side defroster outlets
2.} Toyota Sienna Side vents
3.} Toyota Sienna Instrument cluster
4.} Toyota Sienna Automatic transmission selector lever
5.} Toyota Sienna Center vents
6.} Toyota Sienna Garage door r opener box or auxiliary box
7.} Toyota Sienna Electric c moon roof switch or personal light switch
8.} Toyota Sienna Front personal llights or front interior light
9.} Toyota Sienna Power door lock switches
10.} Toyota Sienna Power window switches
11.} Toyota Sienna Glove box
12.} Toyota Sienna Auxiliary boxes
13.} Toyota Sienna Tilt steering lock release lever
14.} Toyota Sienna Hood lock release lever
15.} Toyota Sienna Parking brake pedal
16.} Toyota Sienna Window lock switch


Toyota Sienna Cockpit overview

1.} Toyota Sienna Headlight and turn signal switch
2.} Toyota Sienna Wiper and washer switches
3.} Toyota Sienna Clock

 

4.} Toyota Sienna Air conditioning controls
5.} Toyota Sienna Emergency flasher switch
6.} Toyota Sienna Rear r window and outside rear view wmirror defoggers switch
7.} Toyota Sienna Power rear quarter window switch
8.} Toyota Sienna Rear fan speed selector
9.} Toyota Sienna Car audio
10.} Toyota Sienna Ashtray
11.} Toyota Sienna Cigarette lighter
12.} Toyota Sienna Power outlet
13.} Toyota Sienna Power sliding door switch
14.} Toyota Sienna Ignition switch
15.} Toyota Sienna Cruise control switch
16.} Toyota Sienna Audio remote control buttons
17.} Toyota Sienna Power sliding door off switch
18.} Toyota Sienna Theft tdeterrent system/Engine immobiliser system indicator light
19.} Toyota Sienna Tire pressure warning system reset switch
20.} Toyota Sienna Power rear view mirror control switch
21.} Toyota Sienna Instrument panel light control dial



Toyota Sienna Warning Indicator symbols on the Dashboard

 

Toyota Sienna Warnings

Toyota Sienna Service reminder indicators and warning buzzers
(a) Toyota Sienna Brake System Warning Light' This light has the following functions:
Parking brake reminder If this light is on, make sure the parking
brake is fully released. The light should go off. Toyota Sienna Low brake fluid level warning If this light comes on and stays on while you are driving, slow down and pull off the road. Then stop the my Toyota Sienna carefully. Remember that stopping distance and pedal effort may be increased. There maybe a problem somewhere in the Toyota Sienna brake system. Check the fluid level of the seethrough reservoir. To make sure the Toyota Siennas parking brake has not
caused the warning light to come on, check to see that the parking brake is fully released. If the brake fluid level is low... At a safe place, test your Toyota Sienna brakes by starting and stopping. If you judge that the brakes still work adequately, drive cautiously to your nearest dealer or shop for repairs. If the brakes are not working, have the my Toyota Sienna towed in for repairs. If the brake fluid level is correct... Have the warning system checked by yourToyota Sienna dealer.


(b) Toyota Sienna Driver’s Seat Belt Reminder Light and Buzzer
This light and buzzer remind you to buckle up the driver’s seat belt. Once the ignition key is turned to “ON” or “START”, the reminder light flashes and
buzzer sounds if the driver’s seat belt is not pulled out. Unless the driver starts to pull the shoulder belt out of the retractor, the Toyota Sienna light keeps flashing and the buzzer stops after about 4 to 8 seconds.

(c) Toyota Sienna Front Passenger’s Seat Belt Reminder
Light This light reminds you to buckle up the front passenger’s seat belt.
Once the ignition key is turned to “ON” or “START”, the reminder light flashes if a
passenger sits in the front passenger seat and does not pull out the seat belt. Unless the front passenger starts to pull the Toyota Sienna shoulder belt out of the retractor, the light stays flashing. If luggage load is placed on the front passenger seat, depending on its weight and how it is placed on the seat, built- in sensors in the seat cushion may detect the pressure, causing the reminder light to come on.

(d) Toyota Sienna Discharge Warning Light This light warns that the Toyota Sienna battery is being discharged. If it comes on while you are driving, there is a problem somewhere in the charging system. The engine ignition will continue to operate, however, until the battery is discharged. Turn off the air conditioning, blower, radio, etc., and drive directly to the nearest Toyota Sienna dealer or repair shop.


(e) Toyota Sienna Malfunction Indicator Lamp
This lamp comes on in the following cases.
a. The Toyota Sienna fuel tank is completely empty.
b. The Toyota Sienna fuel tank cap is not tightened securely.
c. There is a problem somewhere in your
Toyota Sienna engine or Toyota Sienna automatic transmission electrical system. If it comes on while you are driving in case c, have your my Toyota Sienna checked/repaired by your Toyota Sienna dealer as soon as possible.


(f) Toyota Sienna Low Fuel Level Warning Light
This light comes on when the Toyota Sienna fuel level in the tank becomes nearly empty. Fill up
the tank as soon as possible. On inclines or curves, due to the movement of fuel in the tank, the low fuel level warning light may come on earlier than usual.

(g) Toyota Sienna Low Oil Pressure Warning Light
This light warns that the Toyota Sienna engine oil pressure is too low. If it flickers or stays on while you are driving, pull off the road to a safe place and stop the engine immediately. Call a Toyota Sienna dealer or qualified repair shop for assistance.
The light may occasionally flicker when the engine is idling or it may come on briefly after a hard stop. There is no cause for concern if it then goes out when
the engine is accelerated slightly. The light may come on when the Toyota Sienna oil level is extremely low. It is not designed to indicate low oil level, and the oil level must be checked using the level dipstick.

(h) Toyota Sienna “ABS” Warning Light

This light warns that there is a problem somewhere in your anti- lock brake system. If the light comes on while you are driving, have your my Toyota Sienna checked by your Toyota Sienna dealer as soon as possible. The light will come on when the ignition key is turned to the “ON” position. After a few seconds, the light will go off. When the Toyota Sienna ABS warning light is on (and the brake system warning light is off), the brake system operates conventionally but anti- lock brake system is not assisting

brake performance so that the Toyota Sienna wheels can lock- up during sudden braking or braking
on slippery road surfaces.


(i) Toyota Sienna Open Door Warning Light
This light remains on until all the doors and back door are completely closed.
When the Toyota Sienna ignition switch is “OFF” and this light stays lighting on, the light will turn off automatically after 30 minutes with the light flashing five times. See “Personal lights” and “Interior light” for details in Sanouther post.

(j) Toyota Sienna Open Power Sliding Door Warning Light and Buzzer
This light comes on if the power sliding door is not completely closed with the
ignition key in the “ON” position. If you forcibly close the power sliding door
by hand when the ignition key is in the “ON” position, the open power sliding door
warning light may stay on. In this case, try opening and closing the Toyota Sienna power sliding
door again by hand slowly, or use one of the “PWR DOOR” switches or wireless
remote control transmitter. If you shift out of “P” when the power
sliding door is opened or in the process of closing with the power sliding door system on, a buzzer will sound and the open Toyota Sienna power sliding door warning light will flash. This is a warning that the sliding door is not completely closed.


(k) Toyota Sienna SRS Warning Light
This light will come on when the ignition key is turned to the “ACC” or
“ON” position. After about 6 seconds, the light will go off. This means the
system of the airbag and front seat belt pretensioners are operating properly.
The Toyota Sienna warning light system monitors the airbag sensor assembly, front airbag sensors,
seat belt pretensioner assemblies, inflators, warning light, interconnecting wiring
and power sources. If either of the following conditions occurs,
this indicates a malfunction somewhere in the parts monitored by the warning light
system. Contact your Toyota Sienna dealer as soon as possible to service the my Toyota Sienna. The light does not come on when the ignition key is turned to the “ACC” or “ON” position or remains on. The light comes on or flashes while driving.

(l) Toyota Sienna Low Windshield Washer Fluid Level Toyota Sienna Warning Light
The light warns that the windshield washer fluid level is too low. Add washer fluid at your earliest opportunity.

(m) Toyota Sienna Low Tire Pressure Warning Light
This light warns that the Toyota Sienna tire pressure of any one of the tires is critically reduced. The light comes on when the ignition key is turned to the “ON” position. It goes off after a few seconds. This indicates that the low Toyota Sienna tire pressure warning system is functioning properly. If the light comes on while driving, adjust
tire pressure to the specified level. After the tire pressure is adjusted, the light should go off after driving at about more than 30 km/h (19 mph) for some time. If the light still remains, have the low tire pressure warning system checked at your Toyota Sienna dealer.


(n) Key Reminder Buzzer
This buzzer reminds you to remove the key when you open the driver’s door with
the ignition key in the “ACC” or “LOCK” position.
Toyota Sienna CHECKING SERVICE REMINDER INDICATORS (except the low fuel level warning
light and low windshield washer fluid level warning light)
1. Apply the Toyota Sienna parking brake.
2. Open one of the Toyota Sienna doors. The openToyota Sienna door warning light should come on.
3. Close the door. The open door warning light should go off.
4. Turn the ignition key to “ACC”. The Toyota Sienna SRS warning light should come on. It goes off after about 6 seconds.
5. Turn the Toyota Sienna ignition key to “ON”, but do not start the Toyota Sienna engine. All the service reminder indicators except the open door warning light, open power sliding door warning light and SRS warning light should come on. The “ABS” warning light and low tire pressure warning light go off after a few seconds.
6.Toyota Siennas with a power sliding door:
Open the Toyota Sienna right side sliding door. The open power sliding door warning light should come on. Close the Toyota Sienna right side sliding door. The open power sliding door warning
light should go off. If any service reminder indicator or warning buzzer does not function as described above, either the bulb is burned out or the circuit is in need of repair. Have it checked by your Toyota Sienna dealer as soon as possible.
Toyota Sienna

My New Toyota Sienna, Fuel

My Toyota Sienna Break-in period Drive gently and avoid high speeds.

My Toyota Sienna does not need an elaborate break-in. But following a few simple tips for the first 1600 km (1000 miles) can add to the future economy and long life of my vehicle:
Do not drive over 88 km/h (55 mph). Run the engine at moderate speed between 2000 and 4000 rpm. Avoid full-throttle starts. Try to avoid hard stops during the first 300 km (200 miles). Do not drive for a long time at any single speed, either fast or slow. Do not tow a trailer during the first 800 km (500 miles).

My Toyota Sienna Fuel FUEL TYPE

my new Toyota Sienna must use only unleaded gasoline.

To help prevent gas station mix-ups, my Toyota Sienna has a new smaller fuel tank opening. The special nozzle on pumps with unleaded fuel will fit it, but the larger standard nozzle on pumps with leaded gas will not.

At a minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A. and CGSB 3.5-M93 in Canada.

NOTICE
Do not use leaded gasoline. Use of leaded gasoline will cause the Toyota Sienna three-way catalytic converter to lose its effectiveness and the emission control system to function improperly. Also, this can increase maintenance costs.

Toyota Sienna OCTANE RATING
Select Octane Rating 87 (Research Octane Number 91) or higher. For improved vehicle performance, the use of premium unleaded gasoline with an Octane Rating of 91 (Research Octane Number 96) or higher is recommended.

Use of unleaded gasoline with an octane rating or research octane number lower than stated above will cause persistent heavy knocking. If it is severe, this will lead to engine damage.

If My Toyota Sienna engine knocks...

If I detect heavy knocking even when using the recommended fuel, or if I hear steady knocking Toyota Sienna Toyota dealer.

However, now and then, you may notice light knocking for a short time while accelerating or driving up hills. This is no need of concern.

GASOLINES CONTAINING DETERGENT ADDITIVES
recommend use of gasolines that contain detergent additives to avoid build-up of engine deposits.

For further details, ask your Toyota dealer or a local gasoline retailer.

IMPROVED GASOLINES
The American Automobile Manufacturers Association (AAMA) has developed a specification of improved gasolines. The AAMA specification offers optimal fuel information for better vehicle performance and better protection of your engine.
recommend the use of gasolines that meet the AAMA specification, if available, for improved driveability and emission control system.

GASOLINES CONTAINING MTBE
Gasolines that contain MTBE (Methyl Tertiary-Butyl Ether) are available in the market. If you use a gasoline mixed with MTBE, make certain that it does not contain more than 15% of MTBE.

GASOLINES CONTAINING MMT
Some gasolines contain an octane-en-hancing additive called MMT (methylcyclopentadienyl manganese tricarbonyl).

do not recommend the use of gasolines that contain MMT. If fuels containing MMT are used, your emission control system may be adversely affected. The Malfunction Indicator Lamp on the instrument cluster may come on. If this happens, contact your Toyota Sienna dealer for service.

GASOLINES CONTAINING ALCOHOL
If you use gasohol in your Toyota Sienna, be sure that it is unleaded, has an octane rating no lower than 87 and does not contain more than 10% ethanol.

Gasohol is a mixture of gasoline and ethanol.
doe not recommend the use of gasolines containing methanol. If you use gasoline containing methanol, use only gasoline meeting the requirements above and also containing less than 5% methanol with cosolvents and corrosion inhibitors for methanol.

Toyota Sienna GASOLINES QUALITY
In a very few cases, you may experience driveability problems caused by the particular gasoline that you are using. If you continue to have unacceptable driveability, try changing gasoline brands. If that does not rectify your problem, then consult your Toyota dealer.

NOTICE
Do not use gasohol other than stated above. It will cause Toyota Sienna fuel system damage or Toyota Sienna performance problems.

If driveability problems occur (poor hot starting, vaporizing, engine knock, etc.), discontinue the use.

Take care not to spill gasohol during refueling. Gasohol may cause paint damage.

My Toyota Sienna FUEL TANK CAPACITY

79 L (21 gal., 17.5 lmp. gal.)

Operation in foreign countries Three-way catalytic converter
If you plan to drive your Toyota in

another country... First, comply with the vehicle registration laws.

Second, confirm the availability of the correct fuel (unleaded and minimum octane number).


The three-way catalytic converter is an emission control device installed in the exhaust system.

The purpose is to reduce pollutants in the exhaust gas.

A large amount of unburned gases flowing into the three-way catalytic converter may cause it to overheat and create a fire hazard. To prevent this and other damage, observe the following precautions: Use only unleaded gasoline.

Type B
Toyota Sienna Engine exhaust cautions
Do not drive with an extremely low fuel level; running out of fuel could cause the engine to misfire, creating an excessive load on the three-way catalytic converter.
Do not allow the Toyota Sienna engine to run at idle speed for more than 20 minutes.
Avoid racing the Toyota Sienna engine.
Do not push-start or pull-start your Toyota Sienna.
Do not turn off the ignition while the vehicle is moving.
Keep your engine in good running order. Malfunctions in the engine electrical system, electronic ignition system/distributor ignition system or fuel system could cause an extremely high three-way catalytic converter temperature.
If the engine becomes difficult to start or stalls frequently, take your vehicle in for a check-up as soon as possible. Remember, my Toyota dealer knows your Toyota Sienna and its three-way catalytic converter system best.

Toyota Sienna Trailer Towing

TRAILER TOWING TIPS

When towing a trailer, your Toyota Sienna will handle differently than when not towing. The three main causes of vehicle trailer accidents are driver error, excessive speed and improper trailer loading. Do not just hook up a Trailer and Haul Ass down the road. Towing is not a joke and should be taken seriously! So Keep these in mind when towing:
- Before starting out, check operation of the lights and all Toyota Sienna - trailer connections. After driving a short distance, stop and recheck the lights and connections. Before actually towing a trailer, practice turning, stopping and backing with a trailer in an area away from traffic until you learn the feel.
- Backing with a trailer is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to the right. (This procedure is generally opposite to that when backing without a trailer). Also, just turn the steering wheel a little at a time, avoiding sharp or prolonged turning. Have someone guide you when backing to reduce the risk of an accident.
- Because stopping distance may be increased, vehicle- to- vehicle distance should be increased when towing a trailer. For each 16 km/h (10 mph) of speed, allow at least one vehicle and trailer length between you and the vehicle ahead. Avoid sudden braking as you may skid, resulting in jackknifing and loss of control. This is especially true on wet or slippery surfaces.
- Avoid jerky starts or sudden acceleration.
- Avoid jerky steering and sharp turns. The trailer could hit your Toyota Sienna in a tight turn. Slow down before making a turn to avoid the necessity of sudden braking.
- Remember that when making a turn, the trailer wheels will be closer than the Toyota Sienna's wheels to the inside of the turn. Therefore, compensate for this by making a larger than normal turning radius with your Toyota Sienna.
- Crosswinds and rough roads will adversely affect handling of your Toyota Sienna and trailer, causing sway.
Pay attention to the rear from time to time to prepare yourself for being passed by large trucks or buses, which may cause your vehicle and trailer to sway. If swaying happens, firmly grip the steering wheel and reduce speed immediately but gradually. Never increase speed. Steer straight ahead. If you make no extreme correction with the steering or brakes, the Toyota Sienna and trailer will stabilize. Be careful when passing other vehicles. Passing requires considerable distance. After passing a vehicle, do not forget the length of your trailer and be sure you have plenty of room before changing lanes.
- In order to maintain engine braking efficiency,do not use overdrive.
- Because of the added load of the trailer, your Toyota Sienna’s engine may overheat on hot days (at temperatures over 30 C [85 F]) when going up a long or steep grade with a trailer. If the engine coolant temperature gauge indicates overheating, immediately turn off the air conditioning (if in use), pull off the road and stop in a safe spot.
- Always place wheel blocks under both the Toyota Sienna and trailer wheels when parking. Apply the parking brake firmly. Put the transmission in “P”. Avoid parking on a slope with a trailer, but if it cannot be avoided, do so only after performing the following:
1. Apply the brakes and hold.
2. Have someone place wheel blocks under both the Toyota Sienna and trailer wheels.
3. When the wheel blocks are in place, release your brakes slowly until the blocks absorb the load.
4. Apply the parking brake firmly.
5. Shift into “P” and turn off the engine.


When restarting out after parking on a slope:
1. With the transmission in “P” position, start the engine. Be sure to keep the brake pedal depressed.
2. Shift into gear.
3. Release the parking brake and brake pedal and slowly pull or back away from the wheel blocks. Stop and apply your brakes.
4. Have someone retrieve the blocks.
CAUTION
- Do not exceed 72 km/h (45 mph) or the posted towing speed limit, whichever is lower. Because instability (swaying) of a towing vehicletrailer combination usually increases as the speed increases, exceeding 72 km/h (45 mph) may cause loss of control.
- Slow down and downshift before descending steep or long downhill
grades. Do not make sudden downshifts. Avoid holding the brake pedal down too long or too frequently. This could cause the brakes to overheat and result in reduced braking efficiency.

Do not use your parking brake when there is a possibility it could freeze. When parking, put the transmission into “P” and block the rear wheels. Do not use the parking brake, or snow or water accumulated in and around the parking brake mechanism may freeze, making it hard to release. Keep ice and snow from accumulating under the fenders. Ice and snow built up under your fenders can make steering difficult. During bad winter driving, stop and check under the fenders occasionally.
Carry some emergency equipment.
Some of the things you might put in the Toyota Sienna are tire chains, window scraper, bag of sand or salt, flares, small shovel, jumper cables, socket set, safety glasses, water, etc.

Your Sienna is designed primarily as apassenger- and- load- carrying vehicle. Towing a trailer will have an adverse effect on handling, performance, braking, durability and driving economy (fuel consumption, etc.). Your safety and satisfaction depend on the proper use of correct equipment and cautious driving habits. For your safety and the safety of others, you must not overload your vehicle or trailer. Ask your local Toyota dealer for further details before towing with your Toyota Sienna.

WEIGHT LIMITS
Before towing, make sure the total trailer weight, gross combination weight, gross vehicle weight, gross axle weight and trailer tongue load are all within the limits. The total trailer weight and tongue load can be measured with platform scales found at a highway weighing station, building supply company, trucking company, junk yard, etc.

The maximum gross trailer weight (trailer weight plus cargo weight)must never exceed the following: Toyota Sienna Without towing package 907 kg (2000 lb.), Toyota Sienna With towing package 1587 kg (3500 lb.) If towing a trailer and cargo weighing over 907 kg (2000 lb.), it is necessary to use a sway control device with sufficient capacity. The combination of the gross trailer weight added to the total weight of the vehicle, occupants and vehicle cargo must never exceed a total of the following. Toyota Sienna Without towing package 3129kg (6900 lb.), Toyota Sienna With towing package 3537 kg (7800 lb.) Exceeding the maximum weight of the trailer, the Toyota Sienna, or the Toyota Sienna and trailer combination, can cause an accident resulting in serious personal injuries.

Trailer hitch assemblies have different weight capacities established by the hitch manufacturer. Even though the vehicle may be physically capable of towing a higher weight, the operator must determine the maximum weight rating of the particular hitch assembly and never exceed the maximum weight rating specified for the trailer- hitch. Exceeding the maximum weight rating set by the trailer hitch manufacturer can cause an accident resulting in serious personal injuries



The gross vehicle weight must not exceed the Gross Vehicle Weight Rating (GVWR) indicated on the Certification Label. The gross vehicle weight is the sum of weights of the unloaded vehicle, driver, passengers, luggage, hitch and trailer tongue load. It also includes the weight of any special equipment installed on your Toyota Sienna.

The load on either the front or rear axle resulting from distribution of the gross vehicle weight on both axles must not exceed the Gross Axle Weight Rating (GAWR) listed on the Certification Label.

The trailer cargo load should bedistributed so that the tongue load is 9 to 11% for weight carrying hitch (*1) or 15% for weight distributing hitch (*2) of the total trailer weight, not exceeding the maximum load of the following.



Weight carrying hitch Without towing package 90 kg (200 lb.) With towing package 158 kg (350 lb.) Weight distributing hitch With towing package 238 kg (525 lb.) Never load the trailer with more weight in the back than in the front. About 60% of the trailer load should be in the front half of the trailer and the remaining 40% in the rear.

HITCHES
If you wish to install a trailer hitch on your Toyota Sienna, you should consult with your Toyota dealer. Use only a hitch recommended by the hitch manufacturer and the one which conforms to the total trailer weight requirement. The hitch must be bolted securely to the vehicle frame and installed according to the hitch anufacturer’s instructions. The hitch ball and king pin should have a light coat of grease.

Remove the trailer hitch whenever you are not towing a trailer to reduce the possibility of additional damage caused by the hitch if your vehicle is struck from behind. After removing the hitch, seal any mounting holes in the vehicle body to prevent entry of pollutants such as exhaust fumes, dirt, water, etc.
Do not use axle- mounted hitches as they can cause damage to the axle housing, wheel bearings, wheels or tires. Also, never install a hitch which may interfere with the normal function of an Energy Absorbing Bumper, if so equipped.

BRAKES AND SAFETY CHAINS
Use trailers with brakes that conform to any applicable federal and state/provincial regulations. A safety chain must always be used between the towing vehicle and the trailer. Leave sufficient slack in the chain for turns. The chain should cross under the trailer tongue to prevent the tongue from dropping to the ground in case it becomes damaged or separated. For correct safety chain procedures, follow the hitch or trailer manufacturer’s recommendations.
CAUTION
If the total trailer weight exceeds 453 kg (1000 lb.), trailer brakes are required.
Never tap into your vehicle’s hydraulic system as it would lower its braking effectiveness. Never tow a trailer without using a safety chain securely attached to both the trailer and the vehicle. If damage occurs to the coupling unit or hitch ball, there is danger of the trailer wandering over into another lane.

TIRES
Ensure that your Toyota Sienna’s tires are properly inflated. The trailer tires should be inflated to the pressure recommended by the trailermanufacturer in respect to the total trailer weight.
TRAILER LIGHTS
Trailer lights must comply with federal, state/provincial and local regulations.
See your local recreational vehicle dealer or rental agency for the correct type of wiring and relays for your trailer. Check for correct operation of the turn signals and stop lights each time you hitch up. Direct splicing may damage your vehicle’s electrical system and cause a malfunction of your lights.
BREAK- IN SCHEDULE
Do not tow a trailer with a new Toyota Sienna or a Toyota with any new power train component (engine, transmission, differential, wheel bearing, etc.) for the first 800 km (500 miles) of driving.
MAINTENANCE
If you tow a trailer, your Toyota Sienna will require more frequent maintenance due to the additional load. Retighten all fixing bolts of the towing ball and bracket after approximately 1000 km (600 miles) of trailer driving.
PRE- TOWING SAFETY CHECK
Check that your Toyota Sienna remains level when a loaded or unloaded trailer is hitched. Do not drive if the vehicle has an abnormal nose- up or nose- down condition, and check for improper tongue load, overload, worn suspension or other possible causes. Make sure the trailer cargo is securely loaded so that it cannot shift. Check that your rear view mirrors conform to any applicable federal, state/ provincial or local regulation. If not, install the rear view mirrors required for towing purpose.

Starting and Driving my Toyota Sienna

Before starting the engine
1. Check the area around the vehicle before entering it.
2. Adjust seat position, seatback angle,seat cushion angle, head restraint height and steering wheel angle.
3. Adjust inside and outside rear view mirrors.
4. Lock all doors.
5. Fasten seat belts.

How to start the engine—
(a) Before cranking
1. Apply the parking brake firmly.
2. Turn off unnecessary lights and accessories.
3. Put the selector lever in “P”. If you need to restart the engine while the vehicle is moving, put the selector lever in “N”. A starter safety device will prevent the starter from operating if the selector lever is in any drive position.
4. Depress the brake pedal and hold it to the floor until driving off.
(b) Starting the engine
Before starting the engine, be sure to follow the instructions in “(a) Before cranking”.
Normal starting procedure
The multiport fuel injection system/sequential multiport fuel injection system in your engine automatically controls the proper air- fuel mixture for starting. You can start a cold or hot engine as follows:
1. With your foot off the accelerator pedal, crank the engine by turning the key to “START”. Release it when the engine starts.
2. After the engine runs for about 10 seconds, you are ready to drive.
If the weather is below freezing, let the engine warm up for a few minutes before driving. If the engine stalls... Simply restart it, using the correct procedure given in normal starting.

Tips for driving in various conditions
Always slow down in gusty crosswinds. This will allow you much better control. Drive slowly onto curbs and, if possible, at a right angle. Avoid driving onto high, sharp- edged objects and other road hazards. Failure to do so can lead to severe tire damage resulting in tire bursts.
When parking on a hill, turn the front wheels until they touch the curb so that the vehicle will not roll. Apply the parking brake, and place the transmission in “P”. If necessary, block the wheels. Washing your vehicle or driving through deep water may get the brakes wet. To
see whether they are wet, check that there is no traffic near you, and then
press the pedal lightly. If you do not feel a normal braking force, the brakes
are probably wet. To dry them, drive the vehicle cautiously while lightly
pressing the brake pedal with the parking brake applied. If they still do not
work safely, pull to the side of the road and call a Toyota dealer for assistance.

Winter driving tips
Make sure you have a proper freeze protection of engine coolant.
Your coolant must contain ethylene- glycol type coolant for a proper corrosion
protection of aluminum components. Use “TOYOTA Long Life Coolant” or equivalent.
Do not use alcohol type antifreeze or plain water alone.

When it is extremely cold, we recommend to use 60% solution for your Toyota, to
provide protection down to about -50°C (- 58°F). Do not use more than 70% solution
for better coolant performance. Check the condition of the battery and cables. Cold temperatures reduce the capacity of any battery, so it must be in top shape to provide enough power for winter starting. inspect the battery. Your Toyota dealer and most service stations will be pleased to check the level of charge.

Make sure the engine oil viscosity is suitable for the cold weather.
Leaving a heavy summer oil in your vehicle during winter months may cause harder starting. If you are not sure about which oil to use, call your Toyota dealer— they will be pleased to help. Keep the door locks from freezing. Squirt lock de- icer or glycerine into the locks to keep them from freezing. Use a washer fluid containing an antifreeze solution. This product is available at your Toyota dealer and most auto parts stores. Follow the manufacturer’s directions for how much to mix with water.

Toyota Sienna Unfortunate Situations

If your Toyota Sienna  will not start—
(a) Simple checks
Before making these checks, make sure you have followed the correct starting procedure and that you have sufficient fuel. If your Toyota Sienna  is equipped with the engine immobiliser system, also check whether the other keys will start the engine. If they work, your key may be broken. Have the key checked at your Toyota dealer. If none of your keys work, the system is possibly broken. Call your Toyota Sienna dealer.
If the Toyota Sienna engine is not turning over or is turning over too slowly
Check that the Toyota Sienna  battery terminals are tight and clean.

If the battery terminals are O.K., switch on the interior light.
If the Toyota Sienna light is out, dim or goes out when the Toyota Sienna starter is cranked, the battery is discharged. You may try jump starting. See “(c) Jump starting” for further instructions.

If the light is O.K., but the engine still will not start, it needs adjustment or repair. Call a Toyota Sienna  dealer or qualified Toyota Sienna repair shop.
Do not pull-or push-start the Toyota Sienna. It may damage the vehicle or cause a collision when the engine starts. Also the three-way catalytic converter may overheat and become a fire hazard.
If the Toyota Sienna engine turns over at its normal speed but will not start— Check that all the push-on connectors are tight. (For example, connectors at the Toyota Sienna spark plugs, ignition coil and/or distributor)

If the connectors are O.K., the Toyota Sienna engine may be flooded because of repeated cranking. See “(b) Starting a flooded engine” for further instructions.
(b) Starting a flooded Toyota Sienna engine
If the engine will not start, your engine may be flooded because of repeated cranking.
If this happens, turn the Toyota Sienna key to “START” with the accelerator pedal held down. Keep the key and accelerator pedal so for 15 seconds and release them. Then try starting the engine with your foot off the accelerator pedal.
If the Toyota Sienna engine does not start after 15 seconds of cranking, release the key, wait a few minutes and try again.
If the engine still will not start, it needs adjustment or repair. Call a Toyota dealer or qualified repair shop for assistance.
Do not crank for more than 30 seconds at a time. This may overheat the Toyota Sienna starter and Toyota Sienna wiring systems.
(c) Toyota Sienna Jump starting
To avoid serious personal injury and damage to your Toyota Sienna which might result from battery explosion, acid burns, electrical burns, or damaged electronic components, these instructions must be followed precisely.


If you are unsure about how to follow this procedure, it is strongly recommend that you seek the help of a competent mechanic or towing service.

The battery used for boosting must be 12 V. Do not jump start unless you are sure that the booster battery is correct.

Toyota Sienna JUMP STARTING PROCEDURE

If the booster battery is installed in another Toyota Sienna , make sure the vehicles are not touching. Turn off all unnecessary lights and accessories.


If required, remove all the vent plugs from the booster and discharged batteries. Lay a cloth over the open vents on the batteries. (This helps reduce the explosion hazard, personal injuries and burns.)

If the engine in the vehicle with the booster battery is not running, start it and let it run for a few minutes. During jump starting, run the Toyota Sienna engine at about 2000 rpm with the accelerator pedal lightly depressed.

4. Make the cable connections in the order a, b, c, d.

.


.

a. Connect the clamp of the positive (red) jumper cable to the positive ( ) terminal on the discharged Toyota Sienna  battery.


b. Connect the clamp at the other end of the positive (red) Toyota Sienna jumper cable to the positive ( ) terminal on the booster battery.

..
.
.
.
c. Connect the clamp of the negative (black) Toyota Sienna jumper cable to the negative (-) terminal on the booster battery.

d. Connect the clamp at the other end of the negative (black) jumper cable to a solid, stationary, unpainted, metallic point of the Toyota Sienna with the discharged battery.

The recommended connecting point is shown in the following illustration:

.

.

Toyota Sienna Connecting point
Do not connect the cable to or near any part that moves when the Toyota Sienna engine is cranked.

.
.
.
.
.
If you have a flat tire in your Toyota Sienna

Reduce your Toyota Sienna speed gradually, keeping a straight line. Move cautiously off the road to a safe place well away from the traffic. Avoid stopping on the center divider of a highway. Park on a level spot with firm ground.

Stop the Toyota Sienna engine and turn on your Toyota Sienna emergency flashers.
Firmly set the Toyota Sienna parking brake and put the transmission in “P”.

Have everyone get out of the Toyota Sienna on the side away from traffic. And get far away from the roadway.

Read the following instructions thoroughly.
Do not continue driving with a deflated tire. Driving even a short distance can damage a Toyota Sienna tire beyond repair.

Compact spare tire

The compact spare tire is designed for temporary emergency use only.

The compact spare tire is identified by the distinctive wheel design and color and special wording “TEMPORARY USE ONLY” molded into the side wall of the tire.

The standard tire should be repaired and replaced as soon as possible.

To keep the compact Toyota Sienna spare tire noticeable, do not hide the wheel by a wheel cover or such.
The Toyota Sienna compact spare tire saves space in your luggage compartment, and its lighter weight helps to improve fuel economy and permits easier installation in case of a flat tire.

The compact spare tire can be used many times, if necessary. It has tread life of up to 4800 km (3000 miles) depending on road conditions and your driving habits. When tread wear indicators appear on the tire, replace the tire.

Your ground clearance is reduced when the compact Toyota Sienna spare tire is installed so avoid driving over obstacles and drive slowly on rough, unpaved roads and speed bumps. Also, do not attempt to go through an automatic car wash as the Toyota Sienna  may get caught, resulting in damage.

1. Get the required tools and spare tire from your Toyota Sienna.

Toyota Sienna Jack
Jack handle
Wheel nut wrench
Toyota Sienna Spare tire

To prepare yourself for an emergency, you should familiarize yourself with the use of the jack, each of the tools and their storage locations.

Turn the jack joint by hand.

To remove: Turn the joint in direction 1 until the jack is free. To store: Turn the joint in direction 2 until the jack is firmly secured to prevent it flying forward during a collision or sudden braking.

To remove the spare tire;Open the back door and you will find the spare tire clamp bolt near the back door latch. Loosen the spare tire clamp bolt by turning it counterclockwise with the wheel nut wrench. After the tire is lowered completely to the ground, remove the holding bracket.

Compact spare tire— When storing the spare tire, put it in place with the inner side of the wheel facing up.
Except compact spare tire— When storing the spare tire, put it in place with the outer side of the wheel facing up.
Then secure the Toyota Sienna tire by repeating the above removal steps in reverse order to prevent it from flying forward during a collision or sudden braking.

Make sure to pull the tire straight up without catching on any other part.

Do not overtighten the bolt. Stop turning it when you begin to feel resistance on your hand.

After storing the Toyota Sienna tire, make sure it is securely locked by pushing it forward and rearward.
—Blocking the wheel —Removing wheel ornament

2. Block the wheel diagonally opposite the flat tire to keep the vehicle from rolling when it is jacked up.

When blocking the wheel, place a wheel block from the front for the front wheels or from the rear for the rear wheels.
3. Remove the Toyota Siennas wheel ornament.

Pry off the wheel ornament, using the beveled end of the wheel nut wrench as shown.
Steel wheels

Toyota Sienna Aluminium wheels
—Loosening wheel nuts —Positioning the jack —Raising your vehicle

4. Loosen all the wheel nuts.

Always loosen the Toyota Sienna wheel nuts before raising the vehicle.

The nuts turn counterclockwise to loosen. To get maximum leverage, fit the wrench to the nut so that the handle is on the right side, as shown above. Grab the wrench near the end of the handle and pull up on the handle. Be careful that the wrench does not slip off the nut.

Do not remove the nuts yet—just unscrew them about one-half turn.

5. Position the Toyota Sienna jack at the correct jack point as shown.

Make sure the Toyota Sienna jack is positioned on a level and solid place.

6. After making sure that no one is in the Toyota Sienna, raise it high enough so that the spare tire can be installed.
Remember you will need more ground clearance when putting on the Toyota Sienna spare tire than when removing the flat tire.

To raise the vehicle, insert the jack handle into the jack (it is a loose fit) and turn it clockwise. As the jack touches the vehicle and begins to lift, double-check that it is properly positioned.

—Changing Toyota Sienna wheels

7. Remove Toyota Siennas tires.

Roll the spare wheel into position and align the holes in the wheel with the bolts. Then lift up the wheel and get at least the top bolt started through its hole. Wiggle the tire and press it back over the other bolts.

Before putting on wheels, remove any corrosion on the mounting surfaces with a wire brush or such. Installation of wheels without good metal-to-metal contact at the mounting surface can cause wheel nuts to loosen and eventually cause a wheel to come off while driving. Therefore after the first 1600 km (1000 miles), check to see that the wheel nuts are tight.

—Reinstalling Toyota Sienna wheel nuts —Lowering your Toyota Sienna

8. Reinstall all the Toyota Sienna wheel nuts finger tight.

Reinstall the wheel nuts (tapered end inward) and tighten them as much as you can by hand. Press back on the tire and see if you can tighten them more.

9. Lower the Toyota Sienna  completely and tighten the wheel nuts.

Turn the jack handle counterclockwise to lower the vehicle.

Use only the wheel nut wrench to tighten the nuts. Do not use other tools or any additional leverage other than your hands, such as a hammer, pipe or your foot. Make sure the wrench is securely engaged over the nut.

Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight.

—Reinstalling Toyota Sienna wheel ornament —After changing Toyota Sienna wheels

Steel wheels

Toyota Sienna Aluminum wheels

10. Reinstall the Toyota Sienna wheel ornament.

1. Put the wheel ornament into position.

Steel wheel models, align the cutout of the wheel ornament with the valve stem as shown.

2. Then tap it firmly with the side or heel of your hand to snap it into place.

11. Check the Toyota Sienna air pressure of the replaced tire.

Do not forget to reinstall the tire inflation valve cap as dirt and moisture could get into the valve core and possibly cause air leakage. If the cap is missing, have a new one put on as soon as possible.

12. Restow all the tools, Toyota Sienna jack and flat tire securely.
As soon after changing wheels as possible, tighten the wheel nuts

Toyota Siennas with a spare tire of the same size as the installed tires—

13. Push the Toyota Sienna tire pressure warning system reset switch.

Toyota Sienna

Toyota Sienna Appearance And Care

Toyoata Sienna CORROSION PREVENTION AND APPEARANCE CARE
Toyota, through its diligent research, design and use of the most advanced
technology available, has done its part to help prevent corrosion and has provided
you with the finest quality vehicle construction. Now, it is up to you. Proper care of your Toyota Sienna can help ensure longterm corrosion prevention. The most common causes of corrosion to your Toyota Sienna  are:
The accumulation of road salt, dirt and moisture in hard- to- reach areas under
the vehicle. Chipping of paint, or undercoating caused by minor accidents or by stones and gravel.Care is especially important if you live in particular areas or operate your Toyota Sienna under certain environmental conditions: Road salt or dust control chemicals will accelerate corrosion, as will the presence of salt in the air near the seacoast or in areas of industrial pollution. High humidity accelerates corrosion especially when temperatures range just above the freezing point. Wetness or dampness to certain parts of your vehicle for an extended period of time, may cause corrosion even though other parts of the vehicle may be dry. High temperatures will cause corrosion to those components of the vehicle which are prevented from quick- drying due to lack of proper ventilation. The above signifies the necessity to keep your vehicle, particularly the underside, as clean as possible and to repair any damage to paint or protective coatings as soon as possible. To help prevent corrosion on your Toyota, follow these guidelines: Wash your Toyota Sienna frequently. It is, of course, necessary to keep your Toyota Sienna clean by regular washing, but to prevent corrosion, the following points should be observed: If you drive on salted roads in the winter or if you live near the ocean, you should hose off the undercarriage at least once a month to minimize corrosion. High pressure water or steam is effective for cleaning the vehicle’s undersideand wheel housings. Pay particular attention to these areas as it is difficult to see all the mud and dirt. It will do more harm than good to simply wet the mud and debris without removing them. The lower edge of Toyota Sienna doors, Toyota Sienna rocker panels and Toyota Sienna frame members have drain holes
which should not be allowed to clog with dirt as trapped water in these areas can cause corrosion. Wash the underside of the Toyota Sienna  thoroughly when winter is over. Check the condition of your Toyota Sienna’s paint and trim. If you find any chips or scratches in the Toyota Sienna paint, touch them up immediately to prevent corrosion from starting.
If the chips or scratches have gone through the bare metal, have a qualified body shop make the repair.
Protecting your Toyota Sienna from corrosion
Check the interior of your Toyota Sienna . Water and dirt can accumulate under the
Toyota Sienna floor mats and could cause corrosion. Occasionally check under the mats to make
sure the area is dry. Be particularly careful when transporting chemicals, cleansers,
fertilizers, salt, e tc.; these should be transported in proper containers. If a spill or leak should occur, immediately clean and dry the area. Use Toyota Sienna  mud shields on your wheels. If you drive on salted or gravel roads, mud shields help protect your Toyota Sienna . Full- size shields, which come as near to the ground as possible, are the best. We recommend that the fittings and the area where the shields are installed be treated to resist corrosion. Your Toyota dealer will be happy to assist in supplying and installing the shields if they are recommended for your area. Keep your vehicle in a well ventilated garage or a roofed place. Do not park your Toyota Sienna  in a damp, poorly ventilated garage. If you wash your vehicle in the garage, or if you drive it in covered with water or snow, your garage may be so damp it will cause corrosion. Even if your garage is heated, a wet Toyota Sienna  can corrode if the ventilation is poor.
Washing your Toyota Sienna
Keep your vehicle clean by regular washing. The following cases may cause weakness to the paint or corrosion to the body and parts. Wash your vehicle as soon as Possible. When driving in a coastal area When driving on a road sprinkled with antifreeze When having stuck of coal tar, tree sap, bird droppings and carcass of an insect When driving in the areas where there is a lot of smoke, soot, dust, iron dust
and chemical substance When the vehicle becomes remarkably dirty with dust and mud
Hand- washing your Toyota Work in the shade and wait until the Toyota Sienna  body is not hot to the touch. When cleaning under floor or chassis, be careful not to injure your hands. 1. Rinse off loose dirt with a hose. Remove any mud or road salt from the underside of the vehicle or in the wheel wells. 2. Wash with a mild car- wash soap, mixed according to the manufacturer’s instructions. Use a soft cotton mitt and keep it wet by dipping it frequently into the wash water. Do not rub hard—let the soap and water remove the dirt. Toyota Sienna Aluminum wheels: Use only a mild soap or neutral detergent. Toyota Sienna Plastic bumpers: Wash carefully. Do not scrub with abrasive cleaners. The bumper faces are soft. Road tar: Remove with turpentine or cleaners that are marked safe for painted surfaces. Do not use gasoline or strong solvents, which may be toxic or cause damage. 3. Rinse thoroughly—dried soap can cause streaking. In hot weather you may need to rinse each section right after you wash it.
Washing and waxing your Toyota Sienna
4. To prevent water spots, dry the Toyota Sienna using a clean soft cotton towel. Do not
rub or press hard—you might scratch the Toyota Sienna paint. Automatic car wash Your vehicle may be washed in an automatic car wash, but remember that the Toyota Sienna paint can be scratched by some type of brushes, unfiltered washing water, or the washing process itself. Scratching reduces paint durability and gloss, especially on darker colors. The manager of the car wash should be able to advise you whether
the process is safe for the paint on your Toyota Sienna . NOTICE With mast type Toyota Sienna antenna: To prevent damage to the antenna, make sure it is removed before driving your Toyota through an automatic car wash. When your Toyota Sienna  goes through an automatic car wash, make sure the power sliding door system is off. Waxing yourToyota Sienna Polishing and waxing is recommended to maintain the original beauty of your Toyota Sienna’s finish.
Once a month or if the vehicle does not repel water well, apply wax. 1. Always wash and dry the vehicle before you begin waxing, even if you are using a combined cleaner and wax. 2. Use a good quality polish and wax. If the finish has become extremely weathered, use a car- cleaning polish, followed by a separate wax. Carefully follow the Toyota Sienna manufacturer’s instructions and precautions. Be sure to polish and wax the Toyota Sienna chrome trim as well as the paint. 3. Wax the vehicle again when water
does not bead but remains on the surface in large patches. NOTICE Always remove the plastic bumpers if your Toyota Sienna is re- painted and placed in a high heat paint waxing booth. High temperatures could damage the bumpers. Cleaning the interior
CAUTION Do not wash the Toyota Sienna  floor with water, or allow water to get onto the
floor when cleaning theToyota Sienna interior or exterior. Water may get into audio components or other electrical components above or under the Toyota Sienna floor carpet (or mat) and cause a malfunction; and it may cause body corrosion. Vinyl interior The Toyota Sienna vinyl upholstery may be easily cleaned with a mild soap or detergent and water. First acuum over the upholstery to remove loose dirt. Then, using a sponge or soft cloth, apply the soap solution to the Toyota Sienna  vinyl. After allowing it to soak in for a few minutes to loosen the dirt, remove the dirt and wipe off the soap with a clean damp cloth. If all the dirt do not come off, repeat the procedure. Commercial foamingtype vinyl cleaners are also available which work well. Follow the manufacturer’s instructions.
Do not use solvent, thinner, gasoline or window cleaner on the interior. Toyota Sienna Carpets
Use a good foam- type shampoo to clean the carpets. Begin by vacuuming thoroughly to remove as much dirt as possible. Several types of foam cleaners are available; some are in aerosol can sand others are powders or liquids which you mix with water to produce a foam. To shampoo the carpets, use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water—the best results are obtained by keeping the Toyota Sienna carpet as dry as possible. Read the shampoo instructions and follow them closely. Seat belts The seat belts may be cleaned with mild soap and water or with l ukewarm water. Use a cloth or sponge. As you are cleaning, check the belts for excessive wear, fraying, or cuts. Do not use dye or bleach on the belts—it may weaken them. Do not use the belts until they become dry. Windows The Toyota Sienna windows may be cleaned with any household window cleaner. When cleaning the inside of the windows, be careful not to scratch or damage the heater wires on the rear window. Air conditioning Toyota Sienna control panel, car audio, instrument panel, c onsole panel, and switches Use a soft damp cloth for cleaning. Soak a clean soft cloth in water or lukewarm water then lightly wipe off dirt. Do not use organic substances (solvents, kerosene, alcohol, gasoline, etc.) or lkaline or acidic solutions. These chemicals can cause discoloring, staining or peeling of the surface. If you use cleaners or polishing agents, make sure their ingredients do not include the substances mentioned above. If you use a liquid car freshener, do not spill the liquid onto the vehicle’s interior surfaces. It may contain the ingredients mentioned above. Immediately clean any spill using the method mentioned above. Leather Interior The leather upholstery may be cleaned with neutral detergent for wool. Remove dirt using a soft cloth dampened with 5% solution of neutral detergent for wool. Then thoroughly wipe off all traces of detergent with a clean damp cloth. After cleaning or whenever any part of the Toyota Sienna leather gets wet, dry with a soft clean cloth. Allow the Toyota Sienna leather to dry in a ventilated shaded area. If a stain should fail to come out with a neutral detergent, apply a cleaner that does not contain an organic solvent. Never use organic substances such as benzine, alcohol or gasoline, or alkaline or acid solutions for cleaning the leather as these could c ause discoloring. Use of a nylon brush or synthetic fiber cloth, etc. may scratch the fine grained surface of the leather. Mildew may develop on soiled leather upholstery. Be especially careful to avoid oil spots. Try to keep your Toyota Sienna upholstery always clean. Long exposure to direct sunlight may cause the leather surface to harden and shrink. Keep your Toyota Sienna in a shaded area, especially in the summer. The interior of your Toyota Sienna  is apt to heat up on hot summer days, so avoid placing on the upholstery items made of vinyl or plastic or containing wax as these tend to stick to leather when warm. Improper cleaning of the Toyota Sienna leather upholstery could result in discoloration or staining.